Barracuda CNC Revolution 7.0" Shank Filers with 23 Combined Teeth

Barracuda CNC Revolution 7.0" Finishing Scissors - 23 combined teeth - precise texture control, smooth cutting and perfect shape finishing

Barracuda CNC Revolution Finishing Scissors are designed for the most delicate work and creating a natural, neat texture without visible scissor marks. This is a special tool for finishing transitions, soft shape correction and eliminating "lines" after straight scissors. Thanks to the mixed type of teeth, they provide an extremely smooth, clean result that looks professional and impressive on any breed.

Design features and performance properties

• Length 7.0 inches
  This size is optimal for finishing work on the body, head, paws, and areas where it is important to get a perfectly even, almost invisible cut.

• 23 combined teeth (shank filers).
  A feature of this model is the alternation of teeth :

  • the main finishing teeth form a soft cut,

  • and between them are thin milling teeth placed above .

  This raised filing tooth ("shank filer") works as a cut stabilizer: it removes micro-volume and adds smoothness, making the cut airy, even and without clear scars.

• Smooth mirror polish inside and out.
  It reduces friction, makes the movement extremely smooth and prevents the hair from getting "bitten" between the teeth.

• Straight handle with classic grip.
  This shape is well suited for both beginners and experienced groomers - it gives clear control over the position of the teeth and the position of the cut, especially when finishing work.

Precision guaranteed by CNC manufacturing

Barracuda CNC Revolution finishing shears are not made by hand , but are manufactured on high-precision CNC machines , which ensures:

• the same geometry of all 23 teeth;

• correct working angle;

• smooth, even movement without backlash;

• stable repeatability of quality in each pair.

It is this precision that allows the scissors to work predictably and gently, without "pulling out" the fur or leaving defects.

Material — 9CR14CoMoV with cobalt, vanadium and molybdenum

The steel used is the same as in the top Barracuda models:

• 0.35% cobalt — adds hardness and improves sharpening retention;

• vanadium - increases the cleanliness of the cut;

• Molybdenum - improves corrosion resistance and structural stability.

This ensures durability and perfect operation of the tines even under daily finishing loads.

What are Barracuda CNC Revolution 7.0" finishers suitable for?

These scissors are designed for:

• final alignment of the hull;

• soft smoothing of transitions;

• processing of the head, cheeks, muzzle;

• creation of "air" lines;

• elimination of the “step” effect after straight scissors;

• texturing of show dogs;

• work on dense or fluffy wool, where particularly clean cutting is important.

They are often called "new generation finishers" because the combined teeth allow for simultaneous cutting and milling of microvolumes.

Fair price and maximum benefit

The Barracuda CNC Revolution 7.0" with combined teeth is the perfect balance between high performance and affordable price. You get the level of finish quality typical of much more expensive models, but without unnecessary overpayments.